Delbetalning från Description
Analog Turntable
A new, high-performance standard for belt-drive analog turntables
The TN-3B is a stylish, sleek-looking belt-driven turntable with a built-in MM-type PHONO EQ amplifier and USB digital output.
It employs a new tonearm with knife-edge, pivot-point bearings, co-developed with SAEC, the high-end tonearm manufacturer, for superlative stability and resolution.
The belt-drive mechanism, meanwhile, helps mitigate any unwanted cogging effects (ie fine pulsing) from the operation of the motor, to ensure a precise and smooth platter rotation.
The TN-3B also employs a high-precision NJM8080 op-amp in its in-built Phono EQ amplifier, allowing the user to enjoy the sound of their vinyl records with low distortion and in high quality. In addition, a built-in Analog-to-Digital converter and USB port allow users to digitise their vinyl libraries on their PC/Mac.
The TN-3B delivers a natural and well-balanced sound quality and is quick and easy to set up and start enjoying. We believe it sets a new standard that will satisfy the needs of both audiophiles and ardent record collectors.
Features at-a-glance
- 2-speed, belt-drive turntable offering 33-1/3 and 45 rpm speeds
- Knife-edge, pivot-point tonearm designed by high-end tonearm manufacturer SAEC
- Static-balanced, S-shaped tone-arm with pre-installed audio-technica AT-VM95E MM cartridge
- Die-cast aluminum platter
- USB digital output for digital archiving on PC/Mac
- PHONO/LINE analog outputs (switchable)
- Built-in PHONO EQ amplifier, compatible with MM-type cartridges
- Hi-fi grade NJM8080 op-amp used in PHONO EQ stage
Specifications
| Turntable section | |
| Type | Belt-drive (External drive) |
| Motor | DC Motor |
| Rotation Speeds | 33-⅓ rpm, 45 rpm |
| Wow-and-Flutters | 0.1% or less |
| S/N Ratio | 67dB (A-weighted, 20kHz LPF) |
| Turntable (Platter) | |
| Material | Aluminum Die-cast |
| Diameter | 30cm |
| Tone-arm section | |
| Type | S-shape, Static-balanced |
| Effective Length | 223mm |
| Needle Pressure Range | 0g to 5.0g |
| Compatible Cartridge Weight | 3.0g to 12.0g 14g to 23g (including Head-shell) |
| Cartridge section | |
| Type | MM-type |
| Output Voltage | 4.0mV (1kHz, 5cm/sec.) |
| Needle Pressure | 1.8 to 2.2g (2.0g recommended) |
| Weight | 6.1g |
| Head-shell weight | 11g (including screws, nuts, and wires) |
| Compatible Stylus | AT-VMN95E * Average stylus life: approx. 300 hours. |
| Analog Outputs | |
| Connector | RCA Pin jack × 1 pair (Gold-plated) |
| Output Voltage | |
| PHONO | 4.0mV (1kHz) |
| LINE | 224mV (–13dBV) |
| USB Output | |
| Connector | USB B-type (DC 5V 100mA USB Bus power required) |
| Audio Format | PCM, 8k/11.025k/16k/22.5k/32k/44.1k/48kHz, 16bit |
| Operating Power | AC 100 to 240V, 50/60Hz |
| Power Consumption | 1.5W |
| Standby Power | 0.5W |
| Overall Dimensions (W×H×D) | 420 × 117 × 356 mm / 16.5″ × 4.6″ × 14.0″ (including protrusions) |
| Weight | approx. 5.0kg / 11.0 lbs. |
| Included Accessories | Felt Mat, EP Adapter, Counter Weight, Head-shell (AT-VM95E installed), Platter, Dust Cover, Hinges × 2, RCA Audio cable with GND terminal, AC Adapter (GPE053A-V120050), Owner’s Manual (including Warranty Card) |
